Supply Chain Council of European Union | Scceu.org
Procurement

Tamil Nadu Newsprint and Papers : Procurement of 300 GSM CIRCULAR GREY BOARD DISC- 93CM AND 97 CM for Unit-I AND II

M/s.

Dear Sirs,

Sub: TENDER for Procurement of 300 GSM CIRCULAR GREY BOARD DISC- 93CM / 97 CM for Unit-I & Unit-II – Reg.

Ref: Tender No.212213004455

TNPL would like to procure against the above referred Tender. In this connection please find

enclosed the following: General Terms and Conditions, Process Compliance Statement & Terms

Annexure-I

and conditions for Reverse Auction procedure.

Annexure-II

Technical-cum-Commercial Bid

Annexure – III

Price Bid Schedule (to be submitted in separate sealed cover)

The tenderers are requested to go through the General Terms and Conditions of Tender, Terms and Conditions for Reverse Auction and Process Compliance Statement. The tenderers are requested to send one copy of the following duly signed in all pages in token of acceptance, along with the Technical cum Commercial Bid in a separate cover.

  1. General Terms and Conditions of Contract
  2. Terms and Conditions for Reverse Auction Procedure
  3. Process Compliance Statement

Please write on the top of the cover in capital letters as “TECHNICAL-CUM-COMMERICAL BID” addressed to DGM (PURCHASE) , TAMIL NADU NEWSPRINT AND PAPERS LIMITED, Kagithapuram Post, Karur Dist, Pin: 639 136, Tamil Nadu.

The Price Bid (Annexure-III) should also be sent in a separate sealed Tender cover superscribing Tender No and the Due date along with TECHNICAL CUM COMMERCIAL BID. Both the covers containing PRICE BID and TECHNICAL CUM COMMERCIAL BID are to be put in one sealed cover superscribing the Tender No and DUE DATE.

The due date for submission of TECHNICAL CUM COMMERCIAL BID and PRICE BID is 10.01.2022before 3.00 PM.

The Technical cum Commercial Bid will be scrutinized first and those who qualify in the Technical cum Commercial Bids satisfying all the Tender conditions will only be considered for Price bid stage.

Cont…2

TAMILNADU NEWS PRINT AND PAPERS LTD

Tender NO: 212213004455

[2]

Qualifying factors of the Tender:

Please note that the following are the qualifying factors of the Tender. Tenderers who do not comply

with the conditions with documentary proof (wherever required) will not be qualified in the Tender for

Price Bid stage.

1.

TENDERER SHOULD BE A MANUFACTURER (COPY OF REGISTRATION CERTIFICATE TO

BE ENCLOSED). HOWEVER IN CASE THE TENDERER IS A DEALER, NECESSARY

DEALERSHIP CERTIFICATE FROM THE MANUFACTURER SHOULD BE ENCLOSED ALONG

2.

WITH REGISTRATION CERTIFICATE OF MANUFACTURER.

SUBMISSION OF TENDER FEE OF Rs.590/-IN CASE OF SUBMISSION OF TENDER

3.

SUBMISSION OF E M D OF Rs.50,000/-.

4.

RECEIPT AND ACCEPTANCE OF SAMPLE.

5.

ACCEPTANCE OF PRICE VALIDITY AS PER TENDER.

6.

SUBMISSION OF TENDER WITHIN DUE DATE AND TIME

7.

TENDERER SHOULD POSSES

VALID TIN/CST/PAN REGISTRATION (COPY OF

CERTIFICATES TO BE ENCLOSED).

PRICE BID STAGE:

At Price Bid stage, TNPL will follow the following methodology to finalise the Tender:-

1. Price Bid will be obtained from the tenderer in a separate sealed cover along with

technical cum commercial bid.

2. TNPL will fix the opening price and minimum bid decrement for the E-auction (Reverse

Auction).The date and time of E-auction will be communicated to the technically

qualified tenderers separately.

3. After completion of the Reverse Auction bidding, on the same day or next working day

at 4:00PM, TNPL will open the Price Bids of the qualified tenderers in the presence of

interested bidders.

4. The lowest offer received through E-auction or through Price Bid whichever is lower

only will be considered for placement of order.

Tender Fee:

An Tender fee of Rs.590/- (including GST@18%) shall be furnished by way of Demand Draft

drawn in favour of Tamil Nadu Newsprint and Papers Limited payable at Karur. The Tender fee amount should be sent along with Technical cum Commercial Bid.

Earnest Money Deposit (EMD):

1. An EMD amount of Rs.50,000/- shall be furnished by way of Demand Draft drawn in favour of Tamil Nadu Newsprint and Papers Limited payable at Karur. The EMD amount should be sent along with Technical cum Commercial Bid.

2. TNPL will not entertain any request for adjusting the EMD from the tenderer’s due/running bills or from the EMD/Security Deposit of any other tender participated by the tenderer.

3. Offers received without EMD are liable for rejection.

4. The EMD of successful tenderer shall be converted into Security Deposit and the same will be returned after satisfactory completion of order. The Security Deposit shall not bear any interest.

5. The EMD of unsuccessful tenderer will be returned to the tenderer only after releasing the order. The EMD shall not bear any interest.

6. Further, if the tenderer offer is not qualified as per the qualifying factor mentioned in the tender their price bid will be returned back after releasing the order.

NOTE:TNPL is not bound to accept the lowest quotation and TNPL may accept or reject the lowest quotation or any quotation at its sole discretion and go for re-tendering in case the lowest rate obtained in the tender is considered higher.

TNPL reserves the right to reject any or all tenders at our discretion without assigning any reason whatsoever. TNPL is not responsible for any postal or any other delay in submission of bid on due date and in time.

Thanking you,

Yours faithfully,

for TAMIL NADU NEWSPRINT AND PAPERS LIMITED, AGM (PURCHASE)

TAMILNADU NEWS PRINT AND PAPERS LTD

TENDER.NO:212213004455

ANNEXURE I – TERMS AND CONDITIONS

01. QUANTITY:

Our six months requirement of 300 GSM CIRCULAR GREY BOARD DISC-93 CM for Unit-I is 165 MT and 97 CM for unit-II is 30 MT. The quantity indicated is only approximate and TNPL does not guarantee for the same.

02. SPECIFICATION:-

300 GSM CIRCULAR GREY BOARD DISC-93CM

S.NO

PARAMETERS

UNIT

SPECIFICATION

REMARKS

1

SUBSTANCE

G/M2

300 +/- 7.5 %

INDICATIVE

2

BURST

—–

8

CONTROL

FACTOR,MINIMUM

3

COBB SIZING

G/M2

25-30

INDICATIVE

S1/S2,MAXIMUM

4

OUTER LAYER (DIA)

CM

93

INDICATIVE

5

MOISTURE

%

5-8

CONTROL

300 GSM CIRCULAR GREY BOARD DISC-97CM

S.NO

PARAMETERS

UNIT

SPECIFICATION

REMARKS

1

SUBSTANCE

G/M2

300 +/- 7.5 %

INDICATIVE

2

BURST

—–

8

CONTROL

FACTOR,MINIMUM

3

COBB SIZING

G/M2

25-30

INDICATIVE

S1/S2,MAXIMUM

4

OUTER LAYER (DIA)

CM

97

INDICATIVE

MOISTURE

5-8

CONTROL

5

%

REJ

ECTION

CRTERIA:Material will be

rejected if

average burst factor is less than the abo

ve

specification and if the moisture is more than 8%.

NOTE: The sheet should not be very rough as it may not pick up sufficient gum during reel packing.

03. QUALITY:

Quality is the essence of this tender. The supplier shall supply the material strictly as per the

specification mentioned above. The

material supplied will be inspected at our factory. Quantity as

ascertained on receipt of material at

our Site will be treated as quantity supplied wherever the

package/materials are received intact. For

each supply/consignment, test/quality certificate should be

sent without fail. As regards quality, our laboratory analysis report will be final and our decision

on acceptance or rejection will be final and binding on you.

04. VALIDITY:

be valid for a minimum period of 90 DAYS for acceptance from the date of

The rate quoted should

opening of Price Bid. During the validity period, bidder is not permitted to make any upward revision in

the rate. The order

shall be kept valid for a period of six months from the date of release of purchase

order by respective

operating units. During the validity period of the order, no upward revision in price

will be allowed except in case of increase in statutory levies.

Cont…2

TAMILNADU NEWSPRINT AND PAPERS LTD

TENDER No. 212213004455

[2]

05. TRANSPORTATION:

the

supplier to arrange transportation and supply the material on F.O.R.

It is the responsibility of

Destination basis. TNPL requires

the material on F.O.R. Kagithapuram / Mondipatti basis only.

Otherwise the offer is liable for

rejection. The actual weight recorded in TNPL weigh bridge will be

taken for accounting and payment purpose. Hence, TNPL weight is final.

06. TERMS OF PAYMENT:

100% payment will be made within 35 days from the date of receipt of materials subject to acceptance

by RTGS Scheme.

Please provide the following details duly certified by your bankersto the undersigned for onward

submission to our Accounts Department:-

1. Name of the Bank

3. Branch Code

2. Branch Name

4. Account Number

07. DUTIES AND TAXES:

Goods and Service Tax (GST), taxes etc if applicable should be mentioned clearly and separately with the percentage of duties and taxes applicable.

GST:

Duplicate copy of GST invoice should be sent along with each supply for the purpose of availing GST

credit. Copy of GST invoice should be sent in a separate cover addressed to SM (Stores) as may be

specified in the purchase order. Without copy of GST invoice, material will not be unloaded

08. DELIVERY:

order, you shall be in a position to start supplies within short notice and

In the event of an

dispatches are to be

effected as per delivery schedule given by TNPL from time to time by

respective operating units (Unit-I & Unit-II).

09. DELAY OR NON DELIVERY:

Time is the essence of the contract and completion of delivery dates agreed to are binding on the seller. In the event the seller is not able to supply as per the delivery schedules given by TNPL, Purchaser will have a right either to cancel the order without prejudice to any other rights or to make purchase from an alternate source at the risk and cost of the seller.

10. SAMPLE:

All the vendors should submit minimum 5 samples of Grey board disc along with Technical Cum

Commercial Bid as per specification given S.No:2. In

case of non-receipt of sample, the TENDER will

not be considered. Those who fail to submit the

sample in time and whose sample is not found

acceptable, their TENDER will not be considered. The

tenderers are expected to submit only one set

of sample meeting our requirement. In case of any

tenderer submits more than one set of sample, only

one set of sample will be tested and the result of such sample will be considered for evaluation

purpose. In case sample is sent separately, please

ensure that the same should reach us on or before

10.01.2022TNPL will not be responsible for any delay

in receipt of sample and sample received after

10.01.2022will not be accepted. Tenders containing inadequate sample will not be considered. The

test result of our Laboratory/User department will be final and binding and no dispute will be

entertained.

Note: However, existing suppliers against current orders are exempted from submission of sample. Old suppliers are also exempted from submission of sample if the materialspecification is not changed after their last supply.

The sample should be packed separately. The technical bid or the price bid should not beplaced in the sample pack.

Cont…3

TAMILNADU NEWSPRINT AND PAPERS LTD

TENDER No. 212213004455

[3]

11. REJECTION:

CIRCULAR GREY BOARD DISC-93CM/97 CM as per our specification

TNPL requires 300 GSM

given in S.No.2 above. Material not meeting our specification will be rejected outright and the rejected

material shall be taken back

immediately and replacement should be made within 2 days from the date

of intimation. The rejected material

shall be taken back within 15 days from the date of intimation.

Otherwise, the rejected material will be send back to you at your risk and cost without any financial commitment to TNPL.

12. In case of rejection and failure to replace goods, the order will be treated as incomplete and we may cancel the order and will arrange to purchase the goods from elsewhere at your risk and cost and the purchase order on you will be cancelled and action taken as per the order terms.

13. EARNEST MONEY DEPOSIT:

All the bidders are required to pay an EMD of Rs.50,000/- by way of Demand Draft drawn in favour of M/s TAMIL NADU NEWSPRINT AND PAPERS LIMITED payable at KARUR. This amount will not bear any interest and will be returned to the unsuccessful bidders after finalization of the orders.

14. The TENDER should be valid for a minimum period of 90 DAYS from the date of opening of Price Bid. No bidder is permitted to withdraw his offer within the validity period of the TENDER or before finalization of the order. In case any bidder withdraws his offer within the validity period of the offer or before finalization of the order, the EMD amount paid by him will be forfeited.

15. The EMD of the successful bidder will be converted into Security Deposit. This amount will not bear any interest and will be refunded on satisfactory completion of the order. This amount shall stand forfeited in the event of cancellation of order due to unsatisfactory performance of the seller.

16. The suppliers are permitted to deal only with the Purchase Department.

17. TNPL is not bound to accept the lowest quotation and TNPL may accept or reject the lowestquotation or any quotation at its sole discretion without assigning any reason whatsoever.

18. TRANSIT RISK & INSURANCE:

Transit insurance should be arranged by the supplier at their cost.

19. TNPL is not responsible for postal or any other delay for timely receipt of quotation.

20. CANCELLATION:

In the event of unsatisfactory performance in executing the order as per the terms, the order is liable for cancellation. In the event of cancellation, the Security Deposit will be forfeited. TNPL reserves the right to exercise the Risk Purchase Option given in Clause (21) of the General Terms and conditions of the TENDER. Also the TNPL reserves its right to cancel the order in full or part thereof without giving any reason by giving 15days notice if the material is not required due to any reason.

21. WEIGHT VARIATION CLAUSE:Variation in weight will be allowed up to 0.5% to take care of Weigh Bridge to weigh bridge variation. However if the variation exceeds 0.5%, the weight recorded in TNPL weigh bridge will be final and binding for payment purpose.

22. RISK PURCHASE:

In the event of PURCHASER terminating the contract in whole or in part, they may procure on such

terms and in such manner as they deem appropriate, supplies similar to those so terminated and the

SELLER shall be liable to the PURCHASER for any excess cost for similar supplies. However, in

case of part termination of contract by the PURCHASER, the SELLER shall continue the performance

of the contract to the extent it is not terminated under provisions of this clause.

Cont…4

Related posts

Trump touts Kodak loan and PPE procurement, defends hydroxychloroquine video

scceu

Business Reports: Chief Agri purchases assets from Rapat Industries Philippines | Grand Island Local News

scceu

Procurement Consulting Services Market – Global Industry Analysis, Size, Share, Growth, Trends and Forecast to 2026| PwC, Deloitte, KPMG, Ernst & Young – NeighborWebSJ

scceu